Face Mask Making Machine Semi Auto System
Equipment instruction:
It is mainly used for automatic forming of flat face mask: the
whole roll of cloth is driven by the roller after unwinding, and
the cloth is automatically folded and wrapped; the nose beam is
pulled and uncoiled by the whole roll, cut at a fixed length and
then imported into the wrapped cloth, and the two sides are welded
to the seal through ultrasonic welding, and then sealed laterally
by ultrasonic, and then cut and formed by the cutter; the mask is
transported to the two ear belts of the mask through the assembly
line for welding In the working position, the final mask is formed
by ultrasonic welding; when the mask is made, it is transported to
the flat belt line through the assembly line for collection.
Equipment installation and configuration requirements
(1) Equipment size: 6800mm (L) × 3800mm (W) × 2000mm (H);
(2) Appearance color: international standard titanium warm gray 1C,
if there is no special instructions, follow this standard;
(3) Equipment weight: ≤ 5000kg, ground bearing ≤ 500kg / m2;
(4) Working power supply: equipment 220VAC ± 5%, 50Hz, rated power
about 9kw;
(5) Compressed air: 0.5-0.7mpa, with a flow rate of about 300L /
min;
(6) Operating environment: temperature 10-35 ℃, humidity 5-35% HR,
no combustible, corrosive gas, no dust (cleanliness no less than
100000).
It is mainly used for the automatic production of multi-layer
material plane face mask. It can be produced with 1-4 layers of PP
spunbond non-woven fabric, activated carbon and other filter
materials. The whole machine from raw material feeding to nose line
inserting, edge sealing and cutting finished products are all one
line automatic operation. According to the different raw materials
used, different standards such as N95 and FFP2 can be achieved.
